Dhruvanshi International
Surat, Gujarat
GST No. 24AHHPM4698N2ZK
TrustSEAL Verified
Call 0804895845591% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
| Max Sheet Width | 1220 mm |
| Production Capacity | 2 tons per day |
| Power | 15 hp |
| Voltage | 440 V |
| Weight | 10 kg |
| Speed | 15-20 m/min |
| Warranty | 18 months |
| Material Of Blade | Cr12 |
| Texture Of Machine | 18 % GST |
| Brand | Dhruvanshi Group |
| Back Tension | Back side cutter |
| System Control | Delta |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Production Capacity | 15-20 ton/day |
| Power Consumption | 15 HP |
| Machine Type | Fully Automatic |
| Automation Grade | Automatic |
| Max Sheet Width | 1220 mm |
| Job Thickness | 0.5-1 mm |
| Machine Body Material | MS H bEam |
| Material | NO 45 Steel |
| Phase | 3phs |
| Working Speed | 15-20m/min |
| Color | any |
| Frequency | 50-60hz |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
| Automation Grade | Automatic |
| Max Sheet Width | 800-1000 mm |
| Brand | Dhruvanshi Group |
| Material | GCR15 |
| System Control | Delta |
| Phase | 3phs |
| Production Capacity | 15-20m/min |
| Power | 20 hp |
| Voltage | 440 V |
| Weight | 7.5 kg |
| Speed | 15-20m/min |
Steel Roof Sheet Forming MachineWe take immense pride to introduce our company as one of the truthful manufacturers and exporters of Steel Roof Sheet Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.
Features:
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automation Grade | Automatic |
| Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
| Max Sheet Width | 1450mm |
| Production Capacity | 20-100 tons |
| Material | no 1 45 Steel |
| Power Consumption | 15 |
| Phase | 3phs |
| Machine Type | Automatic |
| Customisation | Customised |
| Voltage | 440 |
| Weight | 7.5 |
| Driven Type | Chain |
| Warranty | 18 Months |
| Material Of Blade | CR12 |
| Chains | 1 Inch |
| Sheet Width | 1450mm |
| Texture Of Machine | 18 % GST |
| Brand | Dhruvanshi Group |
| Back Tension | Hydraulic Cutter |
| Number Of Forming Stations | 18 |
| Speed Of The Machine | 15-20m/min |
| System Control | Delta |
| Total Hp For Line | 15 |
Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building's wall. Roll Forming Machine is the essential for its production.
Entry Gate:
Entry gate will be provided for movement of the sheet to roll former.
Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station):
The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine.Each forming head consists of a fixed housing and sliding type outboard housing.The mill stands will be arranged to locate shafts mounted on taper bearing,For the top shafts, the bearings are housed in the cartridge type bearing block.The bottom shaft bearings are located in the bored machined in the housing.The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing
Roll shafts:
The roll shafts dia. 100mm will be manufactured from quality steel and will be keyed to locate tooling.
Drive:
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
Tooling:
One set of Tooling with GCR15 grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.
Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.
b
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Material | Steel |
| Cutting Type | Fully Automatic |
| Number Of Forming Stations | 20 |
| Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
| Automation Grade | Automatic |
| Max Sheet Width | 800-1000 mm |
| Pressure | 0.4-0.6Mpa |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Voltage | 220-440 V |
| Weight | 10 kg |
| Max Sheet Width | 1220 mm |
| Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
| Automation Grade | Automatic |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Automatic Grade | Automatic |
| Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
| Production Capacity | 15-20 ton/day |
| Power Consumption | 25 Hp |
| Brand | Dhruvanshi Group |
| Back Tension | Back Side cutter |
| Speed Of The Machine | 15-20 meter per min |
| System Control | Delta |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Job Thickness | 0.1-0.5 mm, 0.5-1 mm |
| Automation Grade | Automatic |
| Max Sheet Width | 800-1000 mm |
| Phase | 3 |
| Voltage | 440 V |
| Weight | 10 kg |
We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Color Steel Roof Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.
Features:
Product Details:
| Automation Grade | Automatic |
| Job Thickness | 0.5-1 mm, 0.1-0.5 mm |
| Production Capacity (meters/min) | 15-20 metar par minute |
| Max Sheet Width | 1220 mm |
Fully Automatic Cold Roll Forming Machine can Produce a variety of guard rails which is Mostly used in high way Road. Produced guard rails are all in high quality, Durability, Long lasting Life and they are also easy to be installed. One production Machine can produce products of a wide range of specifications, so you will surely get Profile a lot.
Features: