Dhruvanshi International

Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Roll Forming Machine is the essential for its production.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine.Each forming head consists of a fixed housing and sliding type outboard housing.The mill stands will be arranged to locate shafts mounted on taper bearingFor the top shafts, the bearings are housed in the cartridge type bearing block.The bottom shaft bearings are located in the bored machined in the housing.The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts:

The roll shafts dia. 100mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with GCR15 grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Hydraulic Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Roll Forming Machine is the essential for its production.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine.Each forming head consists of a fixed housing and sliding type outboard housing.The mill stands will be arranged to locate shafts mounted on taper bearingFor the top shafts, the bearings are housed in the cartridge type bearing block.The bottom shaft bearings are located in the bored machined in the housing.The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing.

Roll shafts:

The roll shafts dia. 100mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with GCR15 grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.

Cutting Unit (Hydro):

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Specification:
1. D Coiler 1 ton cap.
2. Entry Gate with
3. Roll Forming Line with 14 station , 7 Gear Boxes 10 H.P. electrical.
4. Power press 20 tone,
5. Feeder
6. Control Panel semi auto (servo and proxy)
7. Cutting Unit (Hydro.)
8 Easy Handling
9. Low Maintenance

Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Roll Forming Machine is the essential for its production.

Entry Gate:

Entry gate will be provided for movement of the sheet to roll former.

Main Base:

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):

The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machineEach forming head consists of a fixed housing and sliding type outboard housingThe mill stands will be arranged to locate shafts mounted on taper bearingFor the top shafts, the bearings are housed in the cartridge type bearing blockThe bottom shaft bearings are located in the bored machined in the housingThe bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housing

Roll shafts:

The roll shafts dia. 100mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:

The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:

One set of Tooling with GCR15 grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.

We take immense pride to introduce our company as one of the truthful manufacturers and exporters of 24HP Sheet Roll Forming Machine . A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.

Main Parameters

We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Trapezoid Roof Tile Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.

Features:

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Line with 18 station , 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)
• Fully automatic and zero wastage
• Standard raw material used in machine.

440V Roll Forming Machine: We take immense pride to introduce our company as one of the truthful manufacturers and exporters of 440V Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.

• D Coiler 1 ton cap.
• Entry Gate with
• Roll Forming Line with 14 station , 7 Gear Boxes 10 H.P. electrical.
• Power press 20 tone,
• Feeder
• Control Panel semi auto (servo and proxy)
• Cutting Unit (Hydro.)
• Easy Handling
• Low Maintenance

We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Single Layer Roof Panel Roll Forming Machine A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofs of buildings.

Specifications:-

• D coiler 5 ton cap.
• Entry Gate with
• Roll Forming Line with 18 station , 10 H.P. electrical.
• Control Panel semi auto
• Cutting Unit (Hydro.)
• Fully automatic and zero wastage
• Standard raw material used in machine.
• Low Maintenance
• Easy Handling

We are passionately engaged in manufacturing, trading & supplying an exclusive range of Trapezoidal Sheet Roll Forming Machine that is precisely designed by our experts using topmost grade raw material and latest technology in tandem with the set industrial norms. These are available in various sizes, highly appreciated for their compact design and optimum performance among the clients. Apart from this, offered range is stringently tested against the various parameters under the supervision of quality controllers.

Features:

• Hassle free performance
• Easy to handle
• Perfect finish
• Safe for use
• Effective
• Fair price