Dhruvanshi International

Roll Forming Machine is a vertical member in the light frame construction techniques called balloon framing and platform framing of a building''s wall. Roll Forming Machine is the essential for its production.Entry Gate:Entry gate will be provided for movement of the sheet to roll former.Main Base:The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.Mill stands (Station):The stands are mounted on the bed of the machine the line alignment can be easily done due to guideways arranged on the bed of the machine.Each forming head consists of a fixed housing and sliding type outboard housing.The mill stands will be arranged to locate shafts mounted on taper bearing For the top shafts, the bearings are housed in the cartridge type bearing block.The bottom shaft bearings are located in the bored machined in the housing.The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housingRoll shafts:The roll shafts dia. 100mm will be manufactured from quality steel and will be keyed to locate tooling.Drive:The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motorTooling:One set of Tooling with GCR15 grade will be from an imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with a final template for above.Cutting Unit (Hydro):Hydraulically operated power pack along with cutting die with 3 HP electrical.